Mark’s Magic Tips: Is Remote Printing Secure?
Discover Mark’s Magic Tips for secure remote printing, including print release, encryption, user authentication and protecting business documents.
That bargain box of office paper might not be such a bargain after all. Our engineers explain why some cheaper copier papers could be causing paper jams, damaging printer components and costing businesses more in the long run.
When it comes to reducing everyday office costs, switching to cheaper printer paper might seem like an easy way to save money.
After all, paper is just paper, isn’t it?
Unfortunately, not quite.
At My Group Printing, our engineers are highlighting a growing concern surrounding some of the cheaper, generic copier papers available on the market.
While these products might look identical to the paper you’ve always used, differences in manufacturing quality and consistency could be putting your office printer at risk.
And we’re not just talking about the occasional paper jam. Poor-quality paper can contribute to print defects, premature component wear and potentially expensive repairs.
In this edition of Mark’s Magic Tips, our Senior Engineer and print expert, Mark, shares advice along with fellow engineer George, following recent manufacturer training that highlighted the potential problems associated with inconsistent paper quality.
Here’s what every business should know before ordering its next box of printer paper.
Most offices use standard 80gsm A4 copier paper for everyday printing.
It’s widely available, affordable and generally suitable for most office printers.
However, one of the biggest misconceptions is that all paper labelled 80gsm is essentially the same.
The problem with some cheap, generic copier papers isn’t necessarily the price. It’s the lack of consistency in how they’re manufactured.
Our engineers explains that some generic white copier paper, particularly products sold in basic packaging without a clearly identifiable manufacturer, can vary significantly between deliveries.
You could order two boxes from the same supplier, carrying the same label and barcode, but receive paper manufactured in completely different factories using different materials and production processes.
One batch might work perfectly in your printer. The next could cause repeated paper jams, poor print quality or increased wear on internal components.
As Mark explains:
“It’s not always bad paper. The problem is the quality control. You can buy from the same supplier and receive something completely different, even though the packaging looks identical.”
This makes identifying the cause of printer problems particularly difficult, especially when a business believes it has been ordering exactly the same paper for months.
Don’t assume that paper carrying the same 80gsm label will always perform identically. Look for a recognisable manufacturer and consistent product specifications rather than choosing paper based on price alone.
Modern office printers are sophisticated machines, designed to handle paper within specific tolerances.
Everything from the weight and thickness of the paper to its dimensions, surface finish and moisture content can affect how it travels through the machine.
When you select a paper type in your printer settings, you’re telling the printer what material to expect.
The printer then adjusts aspects of its operation, such as paper handling and, where applicable, toner fusing conditions.
If the paper doesn’t match those expectations, problems can occur.
For example, paper that is inconsistently cut, unusually rough or outside the printer’s supported specifications, may not feed correctly through the machine.
The most obvious warning sign is repeated paper jams.
If your printer has been working reliably and suddenly begins jamming after a new delivery of paper, the paper itself could be responsible.
It’s something our engineers recommend checking before assuming there’s a mechanical problem with the printer.
If you’ve recently changed paper suppliers or opened a new batch, and your printer starts jamming, try a ream of known-quality paper suitable for your machine.
If the problem disappears, you may have identified the cause without needing an engineer visit.
Paper jams are frustrating, but the potential consequences of using unsuitable paper can go further.
Some poorly manufactured papers may contain excessive dust, loose fibres, fillers or surface treatments that can leave deposits inside the printer.
As paper travels through the machine, these materials can accumulate on components involved in feeding, transporting and printing.
Over time, this may contribute to several problems:
Interrupting work, wasting paper and reducing productivity.
Marks, streaks, uneven toner transfer and inconsistent printed results.
Paper dust and residue collecting on rollers and other parts.
Potentially shortening the working life of parts such as transfer belts.
Leaving employees unable to print important documents when needed.
Increased cleaning, service visits or component replacement.
In many colour laser printers, the transfer belt plays an important role in transferring toner during the printing process.
It’s a precision component, and contamination or damage can affect print quality and printer reliability.
Our engineers explains that some lower-quality papers may contain fillers or coatings that can leave unwanted deposits on internal components, including the transfer belt.
Prolonged use of unsuitable paper could contribute to deterioration and, in some cases, the need for replacement.
Not every inexpensive paper will cause these problems. However, consistently using poorly manufactured or unsuitable paper can increase the risk.
A small saving on a box of paper could quickly be outweighed by the cost of printer downtime, wasted prints or replacement components.
This isn’t simply a concern based on isolated printer faults.
Our engineers regularly attend technical training with leading printer manufacturers to keep up to date with developments, maintenance requirements and common equipment issues.
During a recent Canon training course, the subject of inconsistent generic copier paper was specifically highlighted.
The training discussed concerns surrounding the growing use of lower-cost paper products and the difficulties they can create for both printer performance and fault diagnosis.
As an authorised partner of Canon, Toshiba and Ricoh, My Group Printing works closely with leading manufacturers and benefits from access to their technical expertise and training.
This helps our engineers identify potential issues, understand their causes and provide practical advice to customers.
And increasingly, one of those pieces of advice is surprisingly simple:
Be careful about the paper you’re putting through your printer.
The good news is that protecting your printer doesn’t mean buying the most expensive paper on the market.
Nor does it mean you must buy paper carrying the same brand name as your printer.
There are plenty of competitively priced, reputable paper brands that are suitable for everyday office printing.
The important thing is to look for consistent quality and clear product specifications.
Established paper brands are generally a better starting point than unbranded products with limited information about their origin or manufacturing standards.
Not every paper is suitable for every machine. Make sure it is designed for your printer’s technology, whether that’s laser, inkjet or another printing process.
Paper weight is important, but so are thickness, surface finish, cutting accuracy and overall manufacturing consistency.
If your paper arrives in plain packaging with little information about the manufacturer or specification, ask your supplier for more details. Generic packaging alone doesn’t mean the paper is unsuitable, but it may make consistency harder to verify.
Always select the appropriate paper type and weight in your printer settings, particularly when switching between standard copier paper, heavier stock and card.
Saving a few pounds per box is unlikely to be worthwhile if the paper causes repeated jams, wasted prints or additional maintenance.
Before arranging an engineer visit, it’s worth carrying out a few simple checks.
Have you recently changed supplier, paper brand or opened a new batch?
Does it identify the manufacturer? Is it the same product you’ve previously used, or has the packaging changed?
Replace the paper with a known-quality product that is suitable for your printer.
Make sure the selected paper type and weight match the paper you’re using.
If you suspect a quality issue, ask about the paper’s origin and specification. Keep the packaging so the supplier can identify the batch if necessary.
Paper jams can also be caused by worn rollers, damaged components, incorrect settings and other mechanical issues.
If changing the paper doesn’t resolve the problem, your printer may need professional attention.
When troubleshooting a printer problem, always start with the simplest possible explanation.
Sometimes, the difference between a printer that keeps jamming and one that works perfectly is simply the paper you’re using.
There’s nothing wrong with businesses looking for ways to reduce printing costs.
And importantly, cheap paper doesn’t automatically mean bad paper.
The concern is with products that offer little assurance about their quality, consistency or suitability for office printing equipment.
A box of paper might appear to offer excellent value, but if it contributes to frequent jams, poor print quality or premature wear, the initial saving could quickly disappear.
When choosing office paper, we’d encourage customers to think beyond the price per ream and consider the wider cost of keeping their printers working reliably.
A good-quality, competitively priced paper from a reputable manufacturer could prove to be the more economical choice over time.
Before ordering your next batch of office paper, take a moment to check exactly what you’re buying.
Make sure you know who manufactures it, that it’s suitable for your printer and that you’re receiving a consistent product each time.
And if your printer suddenly starts experiencing problems after a paper delivery, don’t automatically assume the machine is at fault.
Check the paper first. It could save you time, money and unnecessary downtime.
At My Group Printing, we’ve been supplying and supporting business printing equipment since 1995.
Our experienced engineers work with leading manufacturers, including Toshiba, Ricoh and Canon, helping businesses keep their printers running efficiently.
Whether you’re experiencing repeated paper jams, unexpected print quality issues or simply want advice on getting the best performance from your equipment, our team is here to help.
Don’t let a small saving on paper turn into a costly printer problem.
Call 01322 643826 or contact My Group Printing for expert advice and support.